Selecting Blend

To blend a part, highlight the part in the database, and select the Blend button.

Note: Before you perform a Blend operation, Clear Coat must be turned on in the Vehicle Options. Select the Vehicle tab, select the Options tab, and select the Paint option. Make sure Clear Coat is checked.

To select Blend

1. Open or create a workfile.
2. Select the Estimate tab, and then select the Lines tab.
3. Select the MOTOR tab.
4. Select a group, a subgroup, and a part from the database panel.
5. With your part highlighted, select Blend from the Operations toolbar. The line is added to the estimate.
   
   - or -
   
   With your part highlighted, select Blend > With Changes. from the Operations toolbar. The Estimate Line Properties screen opens.
6. Adjust the value in the Refinish hours field if needed, and then select Add To Estimate.

© 2024 CCC Intelligent Solutions Inc. All Rights Reserved. CCC, CCC ONE, and the CCC Logo are registered trademarks of CCC Intelligent Solutions Inc. 9/16/2024 - 4:35 PM